Robe Esprite to rent

The Robe ESPRITE, LED automated luminaire has a fast-change, low-cost, transferable light engine ingeniously solving the problem of performance longevity for those preferring the higher brightness of white source LEDs as an obvious replacement for their aging stock of discharge workhorses.

Technical Specification
· Source
Light source type: WTE™ 650W White LED Transferable Engine
LED life expectancy: min. 20.000 hours
CRI: 70/80/90, remotely selectable
Colour temperature: 6.700K
Optical System
Robe’s proprietary optical design
High - efficiency zoom optical system, ratio 9:1
Zoom range: 5.5° - 50°
Output lens diameter: 150 mm
Highly efficient component optics
Fixture total lumen output: up to 27.000 lm
Brightness: 85.000 lx @5m
Dynamic Effects
Cyan: 0 - 100%
Magenta: 0 - 100%
Yellow: 0 - 100%
Variable CTO: 2.700K - 6.700K
Colour Wheel 1: 5 fixed dichroic colours + white
Colour Wheel 2: 5 fixed dichroic colours + white
Framing shutters: Patented framing shutters module with 4 individually positional blades plus rotation of the complete frame system +-60°
Rotating gobo wheel: 7 rotating, indexable and replaceable breakup and aerial gobos + open, patented slot & lock system
Static gobo wheel: 9 static and replaceable gobos + open
Animation wheel: Aluminium animation wheel, used alone or in combination with gobos, rotating in both directions at variable speed
Prism: 6 - facet prism rotating in both directions at variable speed
Iris: Motorized, stepless, pulse effects up to 3 Hz
Frost: light 1° for instant softening of the projected gobo or framing shutters and medium 5° for even wash
Hot-Spot: from flat field to 2,5:1 hot-spot
Motorized zoom and focus
Electronic strobe effect with variable speed up to 20 Hz
High resolution electronic dimming: 0 - 100%
L3™ - (Low Light Linearity) Imperceptible 18 bit dimming for ultra-smooth fade to black
Cpulse™ special flicker free management for HD and UHD cameras, ready for 8K and 16K
Control and Programming
Setting & Addressing: ROBE Navigation System 2 (RNS2)
Display: QVGA Robe touch screen with battery backup, gravitation sensor for auto screen positioning, operation memory service log with RTC, stand-alone operation with 3 editable programs (each up to 100 steps), built-in analyser for easy fault finding
Protocols: USITT DMX-512, RDM, ArtNet, MA Net, MA Net2, sACN
Wireless CRMX™ technology from Lumen Radio: On request
DMX Protocol modes: 2
Control channels: 49, 42
Pan/Tilt resolution: 16 bit
CMY & CTO: 8 bit
Colour wheel positioning: 8 or 16 bit
Framing shutters module movement & rotation: 8 bit
Rotating gobo wheel positioning: 8 bit
Gobo indexing & rotation: 8 or 16 bit
Static gobo wheel positioning: 8 bit
Animation wheel: 8 bit
Animation wheel rotation: 8 bit
Iris: 8 or 16 bit
Frost: 8 bit
Zoom: 8 or 16 bit
Focus: 8 or 16 bit
Dimmer: 8 or 16 bit (internal 18 bit)
Movement
Pan movement: 540°
Tilt movement: 265°
Movement control: Standard and Speed
EMS™: Electronic Motion Stabilizer system for Pan & Tilt reducing beam deviation caused by truss movement or vibration (Patent pending)
Automatic Pan/Tilt position correction
Rotating Gobos
7x rotating glass gobos
Outside diameter: 26.8 mm
Image diameter: 23.5 mm
Thickness: 1.1 mm
Max. thickness: 4 mm
High temperature borofloat or better glass
Static Gobos
9x static glass gobos
Outside diameter: 26.8 mm
Image diameter: 23.5 mm
Thickness: 1.1 mm
Max. thickness: 3.5 mm
High temperature borofloat or better glass


Effect Wheel
Single animation wheel
Material: Aluminium
Can be used alone or in combination with rotating gobos
Rotating in both directions, variable speed
Framing Shutters System
Blades: 4 Blades, each with separate movement and rotation control
Movement: Smooth with variable speed, ultrafast blade movements for creating mid-air effects
Pre-programmed: Shape and blade sequences
Rotation: +- 60° of the complete framing system
Thermal Specification
Maximum ambient temperature: 45°C (113°F)
Maximum surface temperature: 75°C (167°F)
Minimum operating temperature: -5°C (23°F)
Electrical Specification and Connections
Power supply: Electronic auto-ranging
Input voltage range: 100-240 V, 50/60 Hz
Power consumption:
Standard mode max. 870 W at 230 V / 50 Hz
Boost mode max. 950 W at 230 V / 50 Hz
Power in connector: Neutrik powerCON TRUE1
DMX and RDM data in/out: Locking 3-pin & 5-pin XLR
Ethernet port in: RJ45
Mechanical specification
Height: 733 mm (28.9") - head in vertical position
Width: 443 mm (17.4")
Depth: 264 mm (10.4") - head in vertical position
Weight: 27.8 kg (61.3 lbs)
Rigging
Mounting positions: Horizontally or vertically
Universal operating position
Mounting points: 5 pairs of 1/4-turn locking points
2x Omega adaptors with 1/4-turn quick locks
Safety cable attachment point
Pan and Tilt transport locks