Martin MAC III Performance to rent

The MAC III Performance is a high-output profile moving head with a new interleaved framing system with full crossover of each blade and industry-first continuous rotation for new and unlimited projection, framing and effects possibilities. It is available as a stand-alone fixture or as an easy-to-swap module that installs in minutes on any MAC III Profile™.

1500 W short arc discharge lamp with Lok-it!™ base
CMY color mixing system
Framing system with unique continuous rotation, full blade crossover with uniform focus of each blade
FEATURES
1500 W short arc discharge lamp with Lok-it!™ base
CMY color mixing system
Framing system with unique continuous rotation, full blade crossover with uniform focus of each blade
7-position color wheel plus open
Variable CTO
Gobo animation wheel with full movement / direction control
Motorized iris
Mechanical and electronic strobe effect 2 - 10 Hz, pulse effects, instant open and blackout
Uniform dimming plus mechanical shutter for total blackout
1:5 zoom with focus tracking
Modular design for easy maintenance, servicing and product conversion
Electronic ballast, fast lamp re-strike and flicker free light
Pan and tilt (540°/267°) with absolute positioning control
RDM ready, service USB and Art-Net II prepared
Battery powered TFT display and jog wheel navigation
Patented very low-noise cooling. Quietest fixture in its class
Easy conversion between a profile and performance - no need to invest in two separate fixtures
5 indexable rotating gobos
Framing of focused gobo
SPECIFICATIONS
PHYSICAL
Length (Head): 712 mm
Width: 536 mm
Height: 936 mm
Weight: 56.5 kg
DYNAMIC EFFECTS
Color mixing: CMY, independently variable 0 - 100%
Color temperature control: CTO, variable 6000 - 3200 K
Color wheel: 7 interchangeable dichroic filters + open, indexing, continuous rotation, random color
Rotating gobo wheel: Rotating gobo wheel with 5 interchangeable rotating gobos + open, gobo indexing, continuous rotation and shake
Framing: Continuously rotatable framing module with 4 individually controllable blades
Gobo animation: Interchangeable animation wheel, indexing, continuous rotation with variable angle, speed and direction
Beam effects: Interchangeable frost filter (or rotating interchangeable prism)
Iris: 0 - 100%, pulse effects
Dimming: Combined electronic and mechanical 0-100% continuous dimming, choice of four dimming curves
Mechanical shutter: Strobe effect 2 - 10 Hz, pulse effects, instant open and blackout
Focus: 2 m to infinity
Zoom: 11.5° - 55° (cut-off angle)
Zoom-focus linking system: 3-zone
Pan: 540°
Tilt: 268°
Position correction system: Absolute position monitoring
CONTROL AND PROGRAMMING
DMX channels: 33/40
Setting and addressing: Control panel with backlit graphic display and jog wheel or via DMX
RDM: Implemented
16-bit control: Dimmer, gobo indexing (gobo wheel 1), frame rotation, focus, zoom, pan and tilt
DMX compliance: USITT DMX512-A
RDM compliance: ANSI/ESTA E1.20
Receiver: Opto-isolated RS-485
Firmware update: USB memory device or USB/DMX hardware interface over DMX link
LAMP
Type: 1500 W short-arc discharge
Fitted as standard: Osram HTI 1500W/60/P50 Lok-it
Color temperature: 6000 K
CRI (Color rendering index): >85
Average lifetime: 750 hours
Hot restrike: Semi-hot (restrike in under 90 seconds)
Socket: PGJ50
Ballast: Electronic
SERVICE UTILITIES
Fixture identification: User-settable 12-digit ID number
CONSTRUCTION
Color(s): Black
Housing: Magnesium alloy, UV-resistant fiber-reinforced composite
Reflector: Glass, cold light
Protection rating: IP20
GOBOS
Size: E
Approved material: Borosilicate 3.3 or better with dichroic or heavy matted aluminum coating (metal gobos not approved)
Outside diameter: 37.5 mm +0/- 0.2 mm
Maximum image diameter: 30 mm +/- 0.4 mm
Maximum thickness: 1.1 mm +/- 0.1 mm
GOBO ANIMATION WHEEL
Outside diameter: 133.9 mm +/- 0.1 mm
Image outer diameter: 130 mm
Image inner diameter: 32 mm
Thickness: 1.1 mm +/- 0.1 mm
Construction: Borofloat or better with dichroic or enhanced aluminum coating
INSTALLATION
Mounting points: Eight quarter-turn locking points
Orientation: Any
Minimum distance to illuminated surfaces: 2.5 m
Minimum distance to combustible materials: 0.2 m
CONNECTIONS
AC power input: Neutrik PowerCon connector with 3 m cable tail
DMX and RDM data in/out: 5-pin locking XLR
Ethernet (Artnet II compatible, ACN-ready): Neutrik RJ-45 socket (accepts Neutrik EtherCon connectors in housing)
USB memory devices: USB host socket
Future USB options: USB device socket
ELECTRICAL
AC power: 200-240 V nominal, 50/60 Hz
Power supply unit: Auto-ranging electronic switch-mode
Main fuses: 16 AT (x 2)
TYPICAL POWER AND CURRENT
200 V, 50 Hz: 1801 W, 9.0 A, PF 0.996
200 V, 60 Hz: 1805 W, 9.1 A, PF 0.995
208 V, 60 Hz: 1802 W, 8.8 A, PF 0.994
220 V, 50 Hz: 1788 W, 8.2 A, PF 0.994
230 V, 50 Hz: 1783 W, 7.8 A, PF 0.993
240 V, 50 Hz: 1779 W, 7.5 A, PF 0.989
240 V, 60 Hz: 1786 W, 7.5 A, PF 0.987
Measurements made at nominal voltage. Allow for a deviation of +/- 10%.:
PF = power factor:
THERMAL
Cooling: Filtered forced air (temperature-regulated, low noise)
Maximum ambient temperature (Ta max.): 40° C
Maximum surface temperature, steady state, Ta=40° C: 170° C
Total heat dissipation (calculated, +/- 10% at 200 V, 60 Hz): 6160 BTU/hr.
APPROVALS
EU safety: EN 60598-1, EN 60598-2-17
EU EMC: EN 55 015, EN 55 103-1, EN 61 547
US safety: ANSI/UL 1573
Canadian safety: CAN/CSA E60598-1, CAN/CSA E598-2-17