Visions Group

This LED moving bar was designed for stage lighting professionals and is suited for wall washing. Ten high-power Osram Ostar RGBW LEDs are housed inside a 100 cm long (39”) cylindrical aluminium bar. Each parameter of each LED may be controlled individually: colour, 16 bit dimmer and 24 Hz strobe. This Show Batten lens is fitted with a fast wide electronic linear zoom. The colours are generated through R.G.B and W channels, and may also be chosen from a wide palette consisting of over sixty macros. The colour temperature can be linearly adjusted from 2500 K to 8000 K thanks to control through a dedicated CTO channel. With a 240° tilt it can rotate very smoothly and very fast (240° in as little as 0.2 s). Compact, rugged and lightweight: only 9 kg (19.8 lbs). Several bars may be arranged in a line or a matrix, with a constant fixed distance between the LEDs. An internal Ethernet switch for IN/OUT daisy-chain connection makes it easy to connect the bars up for pixel control in a matrix arrangement. Light source: 10 X 15W Osram Ostar RGBW LEDs Distance between LEDs: 100 mm (4”) Independent RGBW color control for each individual LED Effects: dimmer (16 bit), 24 Hz strobe, color macros and effect macros High speed motorized tilt: 240° Internal Ethernet switch for IN/OUT daisy-chain connection to make it easy to connect bars up for pixel control in a matrix arrangement The length and width of the bar allow it to be assembled in horizontal and vertical matrices with a fixed distance between LEDs (100mm/4”) Sockets within the dimensions of the bar to prevent accidental contact with adjacent trusses or bars in matrix arrangements Weight: 10 kg (22 lbs)

The MAC III Performance is a high-output profile moving head with a new interleaved framing system with full crossover of each blade and industry-first continuous rotation for new and unlimited projection, framing and effects possibilities. It is available as a stand-alone fixture or as an easy-to-swap module that installs in minutes on any MAC III Profile™. 1500 W short arc discharge lamp with Lok-it!™ base CMY color mixing system Framing system with unique continuous rotation, full blade crossover with uniform focus of each blade FEATURES 1500 W short arc discharge lamp with Lok-it!™ base CMY color mixing system Framing system with unique continuous rotation, full blade crossover with uniform focus of each blade 7-position color wheel plus open Variable CTO Gobo animation wheel with full movement / direction control Motorized iris Mechanical and electronic strobe effect 2 - 10 Hz, pulse effects, instant open and blackout Uniform dimming plus mechanical shutter for total blackout 1:5 zoom with focus tracking Modular design for easy maintenance, servicing and product conversion Electronic ballast, fast lamp re-strike and flicker free light Pan and tilt (540°/267°) with absolute positioning control RDM ready, service USB and Art-Net II prepared Battery powered TFT display and jog wheel navigation Patented very low-noise cooling. Quietest fixture in its class Easy conversion between a profile and performance - no need to invest in two separate fixtures 5 indexable rotating gobos Framing of focused gobo SPECIFICATIONS PHYSICAL Length (Head): 712 mm Width: 536 mm Height: 936 mm Weight: 56.5 kg DYNAMIC EFFECTS Color mixing: CMY, independently variable 0 - 100% Color temperature control: CTO, variable 6000 - 3200 K Color wheel: 7 interchangeable dichroic filters + open, indexing, continuous rotation, random color Rotating gobo wheel: Rotating gobo wheel with 5 interchangeable rotating gobos + open, gobo indexing, continuous rotation and shake Framing: Continuously rotatable framing module with 4 individually controllable blades Gobo animation: Interchangeable animation wheel, indexing, continuous rotation with variable angle, speed and direction Beam effects: Interchangeable frost filter (or rotating interchangeable prism) Iris: 0 - 100%, pulse effects Dimming: Combined electronic and mechanical 0-100% continuous dimming, choice of four dimming curves Mechanical shutter: Strobe effect 2 - 10 Hz, pulse effects, instant open and blackout Focus: 2 m to infinity Zoom: 11.5° - 55° (cut-off angle) Zoom-focus linking system: 3-zone Pan: 540° Tilt: 268° Position correction system: Absolute position monitoring CONTROL AND PROGRAMMING DMX channels: 33/40 Setting and addressing: Control panel with backlit graphic display and jog wheel or via DMX RDM: Implemented 16-bit control: Dimmer, gobo indexing (gobo wheel 1), frame rotation, focus, zoom, pan and tilt DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20 Receiver: Opto-isolated RS-485 Firmware update: USB memory device or USB/DMX hardware interface over DMX link LAMP Type: 1500 W short-arc discharge Fitted as standard: Osram HTI 1500W/60/P50 Lok-it Color temperature: 6000 K CRI (Color rendering index): >85 Average lifetime: 750 hours Hot restrike: Semi-hot (restrike in under 90 seconds) Socket: PGJ50 Ballast: Electronic SERVICE UTILITIES Fixture identification: User-settable 12-digit ID number CONSTRUCTION Color(s): Black Housing: Magnesium alloy, UV-resistant fiber-reinforced composite Reflector: Glass, cold light Protection rating: IP20 GOBOS Size: E Approved material: Borosilicate 3.3 or better with dichroic or heavy matted aluminum coating (metal gobos not approved) Outside diameter: 37.5 mm +0/- 0.2 mm Maximum image diameter: 30 mm +/- 0.4 mm Maximum thickness: 1.1 mm +/- 0.1 mm GOBO ANIMATION WHEEL Outside diameter: 133.9 mm +/- 0.1 mm Image outer diameter: 130 mm Image inner diameter: 32 mm Thickness: 1.1 mm +/- 0.1 mm Construction: Borofloat or better with dichroic or enhanced aluminum coating INSTALLATION Mounting points: Eight quarter-turn locking points Orientation: Any Minimum distance to illuminated surfaces: 2.5 m Minimum distance to combustible materials: 0.2 m CONNECTIONS AC power input: Neutrik PowerCon connector with 3 m cable tail DMX and RDM data in/out: 5-pin locking XLR Ethernet (Artnet II compatible, ACN-ready): Neutrik RJ-45 socket (accepts Neutrik EtherCon connectors in housing) USB memory devices: USB host socket Future USB options: USB device socket ELECTRICAL AC power: 200-240 V nominal, 50/60 Hz Power supply unit: Auto-ranging electronic switch-mode Main fuses: 16 AT (x 2) TYPICAL POWER AND CURRENT 200 V, 50 Hz: 1801 W, 9.0 A, PF 0.996 200 V, 60 Hz: 1805 W, 9.1 A, PF 0.995 208 V, 60 Hz: 1802 W, 8.8 A, PF 0.994 220 V, 50 Hz: 1788 W, 8.2 A, PF 0.994 230 V, 50 Hz: 1783 W, 7.8 A, PF 0.993 240 V, 50 Hz: 1779 W, 7.5 A, PF 0.989 240 V, 60 Hz: 1786 W, 7.5 A, PF 0.987 Measurements made at nominal voltage. Allow for a deviation of +/- 10%.: PF = power factor: THERMAL Cooling: Filtered forced air (temperature-regulated, low noise) Maximum ambient temperature (Ta max.): 40° C Maximum surface temperature, steady state, Ta=40° C: 170° C Total heat dissipation (calculated, +/- 10% at 200 V, 60 Hz): 6160 BTU/hr. APPROVALS EU safety: EN 60598-1, EN 60598-2-17 EU EMC: EN 55 015, EN 55 103-1, EN 61 547 US safety: ANSI/UL 1573 Canadian safety: CAN/CSA E60598-1, CAN/CSA E598-2-17

The MAC III Profile offers a perfect balance between a superior feature list and ultimate performance. This high-output profile combines advanced 1500 watt lamp technology with superb optical efficiency, an innovative design and great feel to take moving head performance to a higher level. 1500 W short arc discharge lamp with Lok-it!™ base CMY plus variable CTO with non-fade coating technology 7 position color wheel plus open FEATURES 1500 W short arc discharge lamp with Lok-it!™ base CMY plus variable CTO with non-fade coating technology 7 position color wheel plus open Interchangeable 4-facet rotating and indexable prism Motorized iris Mechanical and electronic strobe effect 2 - 10 Hz, pulse effects, instant open and blackout Gobo animation wheel with full movement / direction control 1:5 zoom with focus tracking Completely uniform dimming plus mechanical shutter for total blackout Pan and tilt (540°/267°) with absolute positioning control Modular design for easy maintenance, servicing and product conversion Electronic ballast, fast lamp re-strike and flicker free light Patented very low-noise cooling. Quietest fixture in its class RDM ready, service USB and Art-Net II prepared Battery powered TFT display and jog wheel navigation Easy conversion between a profile and performance - no need to invest in two separate fixtures 2 x 5 indexable rotating gobos plus open SPECIFICATIONS PHYSICAL Length (Head): 712 mm Width: 536 mm Height: 936 mm Weight: 53.5 kg DYNAMIC EFFECTS Color mixing: CMY, independently variable 0 - 100% Color temperature control: CTO, variable 6000 - 3200 K Color wheel: 7 interchangeable dichroic filters + open, indexing, continuous rotation, random color Rotating gobo wheel: Two rotating gobo wheels, each with 5 interchangeable rotating gobos + open, gobo indexing, continuous rotation and shake Gobo animation: Interchangeable animation wheel, indexing, continuous rotation with variable angle, speed and direction Prism: Interchangeable 4-facet rotating prism Iris: 0 - 100%, pulse effects Dimming: Combined electronic and mechanical 0-100% continuous dimming, choice of four dimming curves Mechanical shutter: Strobe effect 2 - 10 Hz, pulse effects, instant open and blackout Focus: 2 m to infinity Zoom: 11.5° - 55° (cut-off angle) Position correction system: Absolute position monitoring Tilt: 268° Pan: 540° Zoom-focus linking system: 3-zone CONTROL AND PROGRAMMING DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20 Receiver: Opto-isolated RS-485 Firmware update: USB memory device or USB/DMX hardware interface over DMX link 16-bit control: Dimmer, gobo indexing (gobo wheels 1 and 2), focus, zoom, pan and tilt RDM: Implemented Setting and addressing: Control panel with backlit graphic display and jog wheel or via DMX DMX channels: 27/30 LAMP Type: 1500 W short-arc discharge Fitted as standard: Osram HTI 1500W/60/P50 Lok-it Color temperature: 6000 K CRI (Color rendering index): >85 Average lifetime: 750 hours Hot restrike: Semi-hot (restrike in under 90 seconds) Socket: PGJ50 Ballast: Electronic SERVICE UTILITIES Fixture identification: User-settable 12-digit ID number CONSTRUCTION Color(s): Black Housing: Magnesium alloy, UV-resistant fiber-reinforced composite Reflector: Glass, cold light Protection rating: IP20 GOBOS Size: E Approved material: Borosilicate 3.3 or better with dichroic or heavy matted aluminum coating (metal gobos not approved) Outside diameter: 37.5 mm +0/- 0.2 mm Maximum image diameter: 30 mm +/- 0.4 mm Maximum thickness: 1.1 mm +/- 0.1 mm GOBO ANIMATION WHEEL Outside diameter: 133.9 mm +/- 0.1 mm Image outer diameter: 130 mm Construction: Borofloat or better with dichroic or enhanced aluminum coating Thickness: 1.1 mm +/- 0.1 mm Image inner diameter: 32 mm INSTALLATION Minimum distance to illuminated surfaces: 2.5 m Minimum distance to combustible materials: 0.2 m Orientation: Any Mounting points: Eight quarter-turn locking points CONNECTIONS AC power input: Neutrik PowerCon connector with 3 m cable tail DMX and RDM data in/out: 5-pin locking XLR Ethernet (Artnet II compatible, ACN-ready): Neutrik RJ-45 socket (accepts Neutrik EtherCon connectors in housing) USB memory devices: USB host socket Future USB options: USB device socket ELECTRICAL AC power: 200-240 V nominal, 50/60 Hz Power supply unit: Auto-ranging electronic switch-mode Main fuses: 16 AT (x 2) TYPICAL POWER AND CURRENT 200 V, 50 Hz: 1801 W, 9.0 A, PF 0.996 200 V, 60 Hz: 1805 W, 9.1 A, PF 0.995 208 V, 60 Hz: 1802 W, 8.8 A, PF 0.994 220 V, 50 Hz: 1788 W, 8.2 A, PF 0.994 230 V, 50 Hz: 1783 W, 7.8 A, PF 0.993 240 V, 50 Hz: 1779 W, 7.5 A, PF 0.989 240 V, 60 Hz: 1786 W, 7.5 A, PF 0.987 Measurements made at nominal voltage. Allow for a deviation of +/- 10%.: PF = power factor: THERMAL Cooling: Filtered forced air (temperature-regulated, low noise) Maximum ambient temperature (Ta max.): 40° C Maximum surface temperature, steady state, Ta=40° C: 170° C Total heat dissipation (calculated, +/- 10% at 200 V, 60 Hz): 6160 BTU/hr. APPROVALS Canadian safety: CAN/CSA E60598-1, CAN/CSA E598-2-17 US safety: ANSI/UL 1573 EU EMC: EN 55 015, EN 55 103-1, EN 61 547 EU safety: EN 60598-1, EN 60598-2-17 CE ETL C US Intertek

The Robe ESPRITE, LED automated luminaire has a fast-change, low-cost, transferable light engine ingeniously solving the problem of performance longevity for those preferring the higher brightness of white source LEDs as an obvious replacement for their aging stock of discharge workhorses. Technical Specification · Source Light source type: WTE™ 650W White LED Transferable Engine LED life expectancy: min. 20.000 hours CRI: 70/80/90, remotely selectable Colour temperature: 6.700K Optical System Robe’s proprietary optical design High - efficiency zoom optical system, ratio 9:1 Zoom range: 5.5° - 50° Output lens diameter: 150 mm Highly efficient component optics Fixture total lumen output: up to 27.000 lm Brightness: 85.000 lx @5m Dynamic Effects Cyan: 0 - 100% Magenta: 0 - 100% Yellow: 0 - 100% Variable CTO: 2.700K - 6.700K Colour Wheel 1: 5 fixed dichroic colours + white Colour Wheel 2: 5 fixed dichroic colours + white Framing shutters: Patented framing shutters module with 4 individually positional blades plus rotation of the complete frame system +-60° Rotating gobo wheel: 7 rotating, indexable and replaceable breakup and aerial gobos + open, patented slot & lock system Static gobo wheel: 9 static and replaceable gobos + open Animation wheel: Aluminium animation wheel, used alone or in combination with gobos, rotating in both directions at variable speed Prism: 6 - facet prism rotating in both directions at variable speed Iris: Motorized, stepless, pulse effects up to 3 Hz Frost: light 1° for instant softening of the projected gobo or framing shutters and medium 5° for even wash Hot-Spot: from flat field to 2,5:1 hot-spot Motorized zoom and focus Electronic strobe effect with variable speed up to 20 Hz High resolution electronic dimming: 0 - 100% L3™ - (Low Light Linearity) Imperceptible 18 bit dimming for ultra-smooth fade to black Cpulse™ special flicker free management for HD and UHD cameras, ready for 8K and 16K Control and Programming Setting & Addressing: ROBE Navigation System 2 (RNS2) Display: QVGA Robe touch screen with battery backup, gravitation sensor for auto screen positioning, operation memory service log with RTC, stand-alone operation with 3 editable programs (each up to 100 steps), built-in analyser for easy fault finding Protocols: USITT DMX-512, RDM, ArtNet, MA Net, MA Net2, sACN Wireless CRMX™ technology from Lumen Radio: On request DMX Protocol modes: 2 Control channels: 49, 42 Pan/Tilt resolution: 16 bit CMY & CTO: 8 bit Colour wheel positioning: 8 or 16 bit Framing shutters module movement & rotation: 8 bit Rotating gobo wheel positioning: 8 bit Gobo indexing & rotation: 8 or 16 bit Static gobo wheel positioning: 8 bit Animation wheel: 8 bit Animation wheel rotation: 8 bit Iris: 8 or 16 bit Frost: 8 bit Zoom: 8 or 16 bit Focus: 8 or 16 bit Dimmer: 8 or 16 bit (internal 18 bit) Movement Pan movement: 540° Tilt movement: 265° Movement control: Standard and Speed EMS™: Electronic Motion Stabilizer system for Pan & Tilt reducing beam deviation caused by truss movement or vibration (Patent pending) Automatic Pan/Tilt position correction Rotating Gobos 7x rotating glass gobos Outside diameter: 26.8 mm Image diameter: 23.5 mm Thickness: 1.1 mm Max. thickness: 4 mm High temperature borofloat or better glass Static Gobos 9x static glass gobos Outside diameter: 26.8 mm Image diameter: 23.5 mm Thickness: 1.1 mm Max. thickness: 3.5 mm High temperature borofloat or better glass Effect Wheel Single animation wheel Material: Aluminium Can be used alone or in combination with rotating gobos Rotating in both directions, variable speed Framing Shutters System Blades: 4 Blades, each with separate movement and rotation control Movement: Smooth with variable speed, ultrafast blade movements for creating mid-air effects Pre-programmed: Shape and blade sequences Rotation: +- 60° of the complete framing system Thermal Specification Maximum ambient temperature: 45°C (113°F) Maximum surface temperature: 75°C (167°F) Minimum operating temperature: -5°C (23°F) Electrical Specification and Connections Power supply: Electronic auto-ranging Input voltage range: 100-240 V, 50/60 Hz Power consumption: Standard mode max. 870 W at 230 V / 50 Hz Boost mode max. 950 W at 230 V / 50 Hz Power in connector: Neutrik powerCON TRUE1 DMX and RDM data in/out: Locking 3-pin & 5-pin XLR Ethernet port in: RJ45 Mechanical specification Height: 733 mm (28.9") - head in vertical position Width: 443 mm (17.4") Depth: 264 mm (10.4") - head in vertical position Weight: 27.8 kg (61.3 lbs) Rigging Mounting positions: Horizontally or vertically Universal operating position Mounting points: 5 pairs of 1/4-turn locking points 2x Omega adaptors with 1/4-turn quick locks Safety cable attachment point Pan and Tilt transport locks

The best things come in small packages, now with zoom included. LEDBeam 150 is the answer with fast sweeping beams and a wide far-reaching quality wash in compact housing. The spectacular zoom range of 3.8° to 60° uses an eminent custom-designed optical system, now equipped with Robe's innovative lens coating technology which brings benefits such as bright and clear lenses, no scratches or marks, higher light output and longer intervals between cleaning. The unique LEDBeam 150 FW offers Fresnel-Wash type of light output for even smooth edges and better color homogenization. Attractive colorful chases and smooth transitions are powered by a cluster of high power multichip 40W RGBW LEDs. A highly optimized motorised control produces speedy pan and tilt movement. Besides intense strobing capabilities, both LEDBeam 150 and LEDBeam 150 FW also offer gentle 18-bit dimming, including Tungsten lamp effects.

Here’s The Point. It’s very bright and super-fast with a sharp parallel beam that cuts through the air and across video with ease. It can project a static or rotating glass gobo to produce precision in-air and surface images with an even focal plane. Tight or at full 20 degree zoom, the output is crystal clear and brilliant. Add in either rotating, 6 way linear or 8 way circular, prisms to create wide reaching effects across any set. Drop in the frost filter and use any of the 13 rich colours to create a smooth even wash. The Point has an output far greater in size, quality and power than seems possible from it’s small, lightweight body – due to the efficient short arc 280 W discharge source and the Robe optical configuration. This new technology fixture even travels efficiently in a case of 4 and will cover all your needs – Beam, Spot, Wash, FX - there is no point in using any other fixture.

Robe Robin Spiider Spiider, a superbright next generation of LED WashBeam luminaries, using 18x 30 Watt and 1x 60 Watt LEDs and combining it with a very efficient 12,5:1 zoom optical system ranging from tight 4° Beam to wide 50° Wash, makes the product the most powerful LED fixture on the market! Beautiful convergence of hard edge in-air effects, punchy beams and smooth homogenized wash is all encapsulated in the unique Spiider. Rich colors of 19 powerfull RGBW LEDs can create charming wash light with velvety smooth transitions thanks to internal 18bit LED dimming system. Dynamic video effects are easily achieved by mapping individual pixels and controlled by DMX desk or media servers via sACN with internal HTP merging, DMX or by Kling-Net protocol. Unique central piece with Robe exclusive Flower Effect is driven by 60W RGBW LED multichip for new innovative sharp multicoloured spikes of light, rotating in both directions at variable speed, adding another new visual effect to the show.

Spikie, a small, super fast LED WashBeam, which utilises a single 60W RGBW light source with a specially designed 110mm wide front lens producing a solid beam.

The G-Spot is a multi-environmental, maintenance-free RGB LED moving head with IP65-rating and a bright color output. It is capable of an even field beam projection with sharp imaging and no color aberrations. The integrated dehumidifier of the G-Spot ensures perfect inner cleanness of the luminaire and no accumulation of dust or externally induced impact on internal optics, gobos or the light source unit. Due to the revolutionary product features, the G-Spot won the prestigious top industry PLASA Award for Innovation, 2013. High-power IP65 RGB LED light source 15327 lumen and 8° to 43° zoom range 2 rotatory gobo wheels, FX wheel, 4-facet prism and ultra-high-speed strobe DMX, RDM and wireless control 2000K - 10000K CTC control, no hotspots Linear frost and smooth iris feature Practically maintenance-free and silent performance Flicker-free / Programmable scenes

VPD 125/1 Distribution Board (125A 3 Phase) Made from a very tough and durable plastic (HDPE) Designed to split 125A 3 phase to multiple single phase sockets with 3 phase availability. Incomer: 125A 400V CEEFORM Protection: 4 Pole MCB Outgoing - 3P+N+E 400V: 1 x 125A CEEFORM - Unprotected 1 x 63A CEEFORM - 4 Pole MCB ‘C’ 2 x 32A CEEFORM - 4 Pole MCB ‘C’ Outgoing - 1P+N+E 230V: 6 x 32A CEEFORM - 2 Pole 30mA RCBO ‘C’ 12 x 16A CEEFORM - 2 Pole 30mA RCBO ‘C’ Dimensions H780 x W550 x D420(mm) Weight: 42kg IP Rating: IP44 External earthing point

VPD 125/10 Distribution Board (125A 3 Phase) Made from a very tough and durable plastic (HDPE) Designed to split 125A 3 phase to multiple three phase sockets. Incomer: 125A 400V CEEFORM Outgoing - 3P+N+E 400V: 2 x 63A CEEFORM - 3 Pole MCB ‘C’ Dimensions H320 x W560 x D360(mm) Weight: 15.7kg IP Rating: IP44 External Earthing Point

VPD 125/2 Distribution Board (125A 3 Phase) Made from a very tough and durable plastic (HDPE) Designed to split 125A 3 phase to multiple single phase sockets with 3 phase availability. Incomer: 125A 400V CEEFORM Protection: 4 Pole MCB Outgoing - 3P+N+E 400V: 1 x 63A CEEFORM - 4 Pole MCB ‘C’ 3 x 32A CEEFORM - 4 Pole MCB ‘C’ Outgoing - 1P+N+E 230V: 12 x 32A CEEFORM - 2 Pole 30mA RCBO ‘C’ 18 x 16A CEEFORM - 2 Pole 30mA RCBO ‘C’ Dimensions H940 x W550 x D480(mm) Weight: 52kg IP Rating: IP44 External earthing point.

VPD 125/3 Distribution Board (125A 3 Phase) Made from a very tough and durable plastic (HDPE) Designed to split 125A 3 phase to multiple single phase sockets with 3 phase availability. Incomer: 125A 400V CEEFORM Outgoing - 3P+N+E 400V: 1 x 63A CEEFORM - 4 Pole MCB ‘C’ + ELRV Outgoing - 1P+N+E 230V: 3 x 125A CEEFORM - 2 Pole MCB ‘C’ + ELRV Dimensions H570 x W560 x D360(mm) Weight: 32kg IP Rating: IP44 External Earthing Point

VPD 125/4 Distribution Board (125A 3 Phase) Made from a very tough and durable plastic (HDPE) Designed to split 125A 3 phase to multiple 3 phase Sockets. Incomer: 125A 400V CEEFORM Outgoing - 3P+N+E 400V: 2 x 63A CEEFORM - 3 Pole MCB ‘C’ Dimensions H320 x W560 x D360(mm) Weight: 15.7kg IP Rating: IP44 External Earthing Point

VPD 125/5 Distribution Board (125A 3 Phase) Made from a very tough and durable plastic (HDPE) Designed to split 125A 3 phase to multiple 3 phase Sockets. Incomer: 125A 400V CEEFORM Outgoing - 3P+N+E 400V: 2 x 63A CEEFORM - 4 Pole MCB ‘C’ + 4 Pole 63A 100mA RCD Dimensions H320 x W560 x D360(mm) Weight: 15.7kg IP Rating: IP44 External Earthing Point

VPD 125/6 Distribution Board (125A 1 Phase) Made from a very tough and durable plastic (HDPE) Designed to split 125A 1 phase to multiple single phase sockets. Incomer: 125A 400V CEEFORM Outgoing - 1P+N+E 230V: 1 x 63A CEEFORM - 2 Pole RCCB 30mA ‘C’ 1 x 32A CEEFORM - 2 Pole RCCB 30mA ‘C’ 3 x 16A CEEFORM - 2 Pole RCCB 30mA ‘C’ Dimensions H340 x W560 x D380(mm) Weight: 14kg IP Rating: IP44

VPD 125/7 Distribution Board (125A 1 Phase) Made from a very tough and durable plastic (HDPE) Designed to split 125A 1 phase to multiple single phase sockets. Incomer: 125A 400V CEEFORM Outgoing - 1P+N+E 230V: 10 x 16A CEEFORM - 2 Pole RCCB 30mA ‘C’ Dimensions H340 x W560 x D350(mm) Weight: 15kg IP Rating: IP44

VPD 125/8 Distribution Board (125A 1 Phase) Made from a very tough and durable plastic (HDPE) Designed to split 125A 1 phase to multiple single phase sockets. Incomer: 125A 400V CEEFORM Outgoing - 1P+N+E 230V: 2 x 63A CEEFORM - 2 Pole MCB ‘C’ + ELRV Dimensions H340 x W560 x D380(mm) Weight: 14kg IP Rating: IP44

VPD 125/9 Distribution Board (125A 1 Phase) Made from a very tough and durable plastic (HDPE) Designed to split 125A 1 phase to multiple single phase sockets. Incomer: 125A 400V CEEFORM Outgoing - 1P+N+E 230V: 8 x 16A CEEFORM - 2 Pole RCCB 30mA ‘C’ 4 x 32A CEEFORM - 2 Pole RCCB 30mA ‘C’ Dimensions H440 x W560 x D360(mm) Weight: 21kg IP Rating: IP44 External Earthing Point