Robins Audio

The InterfaceX links 2-wire or 4-wire analogue intercom systems into the Green-GO digital Ethernet network. This audio in/out interface with contact closures connects to an existing matrix or other analogue interfacing products. A 4-wire intercom can be connected to the dual in/out 3-pin XLR ports. This allows two separate audio signals (or a stereo signal) to be injected into the Green-GO network and transmitted to any other location on the same Ethernet network. Next to the 4-wire connections, there is a separate 3-pin XLR port dedicated to connecting a basic analogue 2-wire intercom (partyline system). All of the ports can be configured individually through the setup menu of the Green-GO InterfaceX. There are also two GPIO connectors provided on the back of the device.

GREEN-GO GGO-BP2LW DIGITAL BELTPACK Dual channel, ethercon RJ45 connection, lightweight cover, black Full duplex, high quality audio, low latency 2, 3 and 4 channel operation, selectable Select from 32 channel options held in memory Powerful headphone amplifier Tough, lightweight, weather-resistant ABS case

This unit incorporates an internal, worldwide voltage operation power supply than powers all the system. In case of a short circuit on any point of the line, the unit shuts down with automatic and instantaneous reset. Separate dual channels are provided with independent TALK and listen A-B balance. Link A-B switch enables line B to be joined to line A when required. A program Input to adapt balanced Mic and Line levels is provided with assign and volume controls. The headset microphone signal is available to drive P.A. systems. Relay contacts are provided that follows the P.A. key action, helping the installer to automate multiple tasks as Tally, switching speakers, cue lights... The unit incorporates, remote all Mic-Off (Mic-Kill) and all Buzzers-Off (Buzz-Kill) switches to both channels. The MULTICHANNEL LINK connection of master stations allows to carry out multichannel systems and use an only headphone for all the intercom lines. Internal Battery operation enabling short time emergency communications on Power dropouts. Relay contacts available NO/NC for multipurpose remote control, enabling Tally, radio station PTT, etc.

The Single Channel Beltpack unit was designed for intensive use in portable applications. An unbreakable plastic belt clip, enables easy and secure suitability. Call signalling is Dual, visual and audible for improving adaptability. The unit can be configured for dynamic or electret microphones enabling the use of different types of headsets and hands-free earpieces in the market.

The new ALTAIR EM-202 beltpack, compatible with the E-200 intercom series, allows independent or simultaneous communications with both channels A and B. Call signalling is dual, visual and audible for improving adaptability. An unbreakable plastic belt clip, enables easy and secure suitability. The unit can be configured for dynamic or electret microphones enabling the use of different types of headsets and hands-free earpieces in the market.