Robins Audio

Compact dynamic cardioid instrument microphone. Transmits high SPLs without distortion. Compatible with toms, snares, and percussion. Clips-on quickly and easily wherever you choose. Tough, reinforced housing, and clamp.

The E 902 is a dynamic cardioid instrument microphone, which was designed for lowest bass signals with very high sound pressure levels. It is suitable for kick drums, bass guitar-amps, tuba, and other bass instruments. Product Features: - Frequency response optimized for kick drum - Very fast attack - Exceptionally clean and clear pick-up of the deepest bass signals - Integral stand mount - Hum compensating coil - Shock mounted capsule - Robust metal body Product Specifications: - Transducer principle (Microphone): dynamic - Pick-up pattern: cardioid - Frequency response: 20...16000 Hz - Sensitivity in free field, no load (1kHz): 0.2 mV/Pa; (60 Hz): 0.6 mV/Pa - Nominal impedance: 350 Ohm - Min. terminating impedance: 1000 Ohm - Connector: XLR-3 - Dimensions: 128.5 x 60 mm - Weight: 440 g

Professional super-cardioid, dynamic instrument mic. Versatile to handle drums, percussion, and guitar amplifiers. Switchable presence filter to tailor its sonic characteristics to different requirements.

The A360 allows individual performers to create custom monitor mixes tailored to their individual needs. Designed for use in live performance or in the studio, the A360 Personal Mixer gives each performer control over channel volume, grouping, pan, stereo spread, and master volume and tone. Every Personal Mixer in a system can create a unique monitor mix for a performer. Users can save and recall up to sixteen custom mixes as presets in their Personal Mixer. The stereo output from the A360 can be used to drive wired or wireless in-the-ear monitors, headphones, powered floor wedges, an amplifier, or spot monitors. The A360 Personal Mixer is fully compatible with all Pro16 Series products & Aviom A-16 products, including Aviom's digital interface card for Yamaha digital mixing consoles. Support for Aviom monitor mixing is available in the form of console interface cards from an ever- increasing list of digital console manufacturers including Digidesign, Soundcraft, Innovason, etc. Look for the A-Net Active logo, and see our Partners page for additional information.

If your audio system includes a Dante™ audio network, the D800-Dante can interface directly to the network. Assign up to 64 channels from Dante to the D800-Dante for distribution to the Aviom personal mixers. Rear-panel DIP switches are used to set the stereo links for channels going to the personal mixers. The stereo output from the A360 can be used to drive wired or wireless in-the-ear monitors, headphones, powered floor wedges, an amplifier, or spot monitors. The A360 Personal Mixer is fully compatible with all Pro16 Series products & Aviom A-16 products, including Aviom's digital interface card for Yamaha digital mixing consoles. Support for Aviom monitor mixing is available in the form of console interface cards from an ever- increasing list of digital console manufacturers including Digidesign, Soundcraft, Innovason, etc. Look for the A-Net Active logo, and see our Partners page for additional information.

The Yamaha MG10 delivers Yamaha quality in a compact body designed to be equally at home on the road or in your studio. The MG10 features 10 inputs: 4 MIC/LINE channels with phantom power, 26 dB Pad and 80Hz HPF filters. These channels also feature gain controls, 3-band EQ AUX send, pan and level controls. The mic preamps are the same studio grade class A discrete 'D-PRE' units used in their high end professional desks ensuring excellent sound quality. Channels 5/6 and 7/8 have 1/4 inch jack and RCA phono inputs, 2-band EQ with AUX send and pan controls, ideal for stereo instruments such as synths or line level devices such as CD players etc. Channels 9/10 are similar but lack the RCA inputs. Channels 1 and 2 are equipped with a newly upgraded version of Yamaha's 1-knob compressor allowing optimised compression to a wide variety of input sources with the touch of a single control. Main outputs are available on 1/4 inch jack and XLR outputs with LED bar graph level metering. Monitor outputs are available on 1/4 jacks and an independent headphone output with it's own level control is also provided.