Hiykon Limited

12way stagebox with 12x 3pin XLR inputs and 1x 37 pin VDM chassis output.

The B6-SUB is a high performance subwoofer designed for ground stacked applications, housing a long excursion 18” driver built into a bass-reflex design. When three or any multiple of three B6-SUBs are used, they can be positioned in a Cardioid Subwoofer Array.

The C4-SUB is a bandpass subwoofer with a rich, punchy sound, specifically designed to match the C4-TOP and extend the C4 frequency response down to 50 Hz.

The C4-TOP is a coaxial hornloaded mid / high frequency loudspeaker and its narrow dispersion characteristics of 35° x 35° above 700 Hz allow for clear and intelligible sound reproduction over long distances at very high SPLs.

Available Qty 1 pair

The C7-SUB is a bass-reflex subwoofer specifically designed for use with the C7-TOP providing dynamic performance with high impulse program, a tight full sound and high efficiency. Its extra large bass-reflex tunnel guarantees high sound pressure while minimizing power compression and air turbulence noise.

The C7-TOP is a 2-way horn loaded loudspeaker that exhibits true constant directivity above a frequency of 600 Hz, ensuring equal sound within the coverage area. The bass-reflex design of the low end allows the C7-TOP to be used without a subwoofer, and with its medium to high sound pressure levels and extended directivity it is ideal for balcony or stadium sound reinforcement, delay and background music playback. Where a more powerful PA system is required a C7-TOP can be stacked with two C7-SUBs.

The E0, the smallest d&b loudspeaker, produces superlative sound and tremendous output for small, near field, delay and surround sound situations, and with the addition of a subwoofer it can be used for music playback. With a frequency response that covers the 80 Hz to 20 kHz band and a 100° conical dispersion, the E0 will display identical directivity whether deployed horizontally or vertically.

The E3 is an extremely small and versatile high performance system with astonishing sound and excellent headroom. The horn, which may be rotated to give either 90° x 60° or 60° x 90° coverage, has the necessary flexibility in directivity to enable a variety of applications such as delay, infill or distributed sound reinforcement applications. In addition, it can be used as an extremely compact stage monitor. Together with a subwoofer system the E3 is also capable of reproducing live or playback music at continuously high SPLs.

The E8 is a high performance 2-way multipurpose loudspeaker, employing an integrated coaxial driver. The E8 can be used for speech and music applications as a stand-alone full range system, or incorporated into larger distributed sound reinforcement situations.

Available Qty 1 pair

The J-SUB is an actively driven 2-way bass-reflex design housing three long excursion neodymium 18" drivers, two drivers face to the front and one driver to the rear. The cardioid dispersion pattern resulting from this approach avoids unwanted energy behind the system, which greatly reduces the reverberant field at low frequencies and provides the greatest accuracy of low frequency reproduction.

The J12 is a 3-way design housing 2 x 12" LF drivers, one hornloaded 10" MF driver and two 1.4" exit HF compression drivers with 3" voicecoils mounted to a dedicated waveshaping device. The mechanical and acoustical design enables flown vertical columns of up to 24 loudspeakers to be suspended using vertical splay angles between them of 0° to 7° with a 1° resolution. The cylindrical wave segments produced couple coherently in the vertical plane.

The J8 is a 3-way design housing 2 x 12" LF drivers, one hornloaded 10" MF driver and two 1.4" exit HF compression drivers with 3" voicecoils mounted to a dedicated waveshaping device. The mechanical and acoustical design enables flown vertical columns of up to 24 loudspeakers to be suspended using vertical splay angles between them of 0° to 7° with a 1° resolution. The cylindrical wave segments produced couple coherently in the vertical plane.

The KSL12 line array module produces an 120° constant directivity dispersion pattern in the horizontal plane over the entire operating bandwidth. The KSL12 houses two 10" neodymium forward facing LF drivers and two side firing 8" neodymium LF drivers. A coaxial mid-high section contains an MF horn with an 8" driver and two 1.4" exit, 3" voice coil HF compression drivers mounted to a dedicated wave shaping device. SL-Series flying hardware comes with a patended workflow with integrated tension and compression rigging modes, allowing splay angles between cabinets from 0° to 10° in 1° increments.

The KSL8 line array module produces an 80° constant directivity dispersion pattern in the horizontal plane over the entire operating bandwidth. The KSL8 houses two 10" neodymium forward facing LF drivers and two side firing 8" neodymium LF drivers. A coaxial mid-high section contains an MF horn with an 8" driver and two 1.4" exit, 3" voice coil HF compression drivers mounted to a dedicated wave shaping device. SL-Series flying hardware comes with a patended workflow with integrated tension and compression rigging modes, allowing splay angles between cabinets from 0° to 10° in 1° increments.

2-way high performance stage monitor with constant directivity dispersion of 50° x 70°.

The SL-G SUB is a cardioid subwoofer to compliment the GSL and KSL Systems. The SL-G SUB is intended for ground stacked applications only. The subwoofer is an actively driven 2-way bass-reflex designs housing three long excursion 21" neodymium drivers. Two drivers face to the front while one radiates to the rear. The front and rear facing drivers operate in independent bass reflex chambers and are driven from separate amplifier channels.

The V-SUB is an actively driven high performance cardioid subwoofer powered by a single amplifier channel. The V-SUB features integrated rigging equipment, and shares the same acoustical and visual design as the V-GSUB, which is intended for ground stacked applications only. It houses two long excursion neodymium drivers, an 18" driver in a bass-reflex design facing to the front and a 12" driver in a two chamber bandpass design radiating to the rear. The cardioid dispersion pattern resulting from this approach avoids unwanted energy behind the system that reduces the reverberant field at low frequencies and provides the greatest accuracy of low frequency reproduction.

The V12 is a 3-way passive design housing 2 x 10" LF drivers, one hornloaded 8" MF driver and two 1.4" exit HF compression drivers with 2.5" voicecoils mounted to a dedicated waveshaping device. The symmetrical dipolar arrangement of the neodymium LF drivers around the centrally mounted coaxial MF and HF components allows a smooth overlap of the adjacent frequency bands in the crossover design. This results in an exceptional 120° horizontal constant directivity dispersion control nominally being maintained down to 250 Hz.