Blackbeam Cinematic

The Behringer MX882 V2 guarantees highest reliability and shortest signal paths. The multi-record amplifier also allows you to convert from studio to home recording levels and vice versa. Ultra-flexible and universally applicable mixer / splitter Can be used as an effect mixer or for live sound reinforcement systems and theatres etc. 8 In/2 Out Line Mixers or 2 In/8 Out Line Splitters Each channel can be operated in both mixer and splitter mode Use as 6 In/6 Out catch-up amplifier or DI box Converts levels between -10 dBV and +4 dBu Extreme bandwidth from 5 Hz to 200 kHz 6 mono inputs 6 mono outputs 2 main inputs 2 main outputs Precise input/output level meters for all channels Dimensions: 44,5 x 483 x 217 mm weight 2,38 kg

16 in 8 out Digital Stage Box. The Tio1608-D is a Dante-equipped I/O rack with 16 microphone/ line inputs and 8 line outputs. Tio racks feature the same recallable D-PRE™ microphone preamplifiers as the TF series delivering extraordinarily natural and musical sound. In combination with TF series consoles, Tio racks can be connected using up to three units with a fast and easy setup.

Stereo active loudspeaker system complete with an active speaker featuring independent bass, treble and volume controls, and a passive satellite. For use where sound reinforcement is required for small rooms or for projector/screen installations. Suitable for free standing or wall mounting via the included adjustable pivot fixing bracket, allowing horizontal or vertical installation.

The1029A is a powerful bi-amplified nearfield monitor. The monitor has a rugged cast aluminium construction and magnetic stray field shielding as default for every unit. Vented speaker enclosure contains an amplification unit, including an active electronic crossover, overload protection circuitry and two power amplifiers, one for each driver. Genelec's unique Directivity Control Waveguide™ is used to provide excellent stereo imaging and frequency balance, even in difficult acoustic environments. Versatile room response controls allow matching of the system to its surroundings. It can be complemented with the 7050A subwoofer. Short term RMS @ 1m 100 dB SPL Peak per pair with music material 110 dB SPL @ 1m Drivers, Bass 5", Treble 3/4" metal dome + DCW, Crossover frequencies 3.3 kHz Free field frequency response ± 2.5dB 70 - 18 000 Hz, Amplifier power / ch Bass 40 W Treble 40 W Speaker dimensions (H x W x D) mm 247 x 151 x 191 mm Speaker weight 6 kg

Specifications: Frequency Response: 80Hz – 19kHz Nominal Impedance: 8Ω per box Crossover Frequency: 2kHz passive Max amplification 450W per box (3 boxes max in parallel per amp channel) Key Features: Connections: NL4 Cased in boxes of 6 Flying and ground support bumpers available Dimensions: (Box of 6 elements)600(h) x 450mm(w) x 1360mm(d) Transport Weight: 130kg (Box of 6 elements)

The GEO M620 is a full-range unit for stand-alone, curved array or line array application. Extremely compact in size (191 x 373 x 260 mm), the M620 module punches well above its weight of less than 10 kgs. Using a NEXO-designed long-excursion high-efficiency 6.5” LF driver and a 1” throat driver on a BEA/FEA optimised HR Wavesource, the M620 delivers a frequency response of 80Hz-19kHz ±3dB, with nominal peak SPL of 127dB. HF dispersion is 80° or 120° horizontal, with 20° vertical coverage,0° to 20° splay when arrayed. Using NEXO’s HRW patented waveguide for optimum HF coupling between elements, the M620 performs in a variety of configurations, facilitated by a fully-integrated 3-point rigging system.

The LS18 sub bass cabinet brings new versatility to NEXO GEO S12 line array systems and PS Series cabinets, delivering high SPL at a relatively low cost. Light and easy-to-handle, the LS18 uses a single 18″ long excursion driver and is compatible with all GEO S12 accessories, so it can fly with the S1230 and S1210 line array modules, or anchor a ground stack of S12 cabinets. With a steel stand fitting on top of the cabinet, the LS18 also allows for pole mounting of GEO S12 cabinets or NEXO PS15-R2 full-range speakers. LS18 can be flown in tandem with PS15s, which will be of particular interest to the installation sector.

The LS400 Sub-Bass extends the usable range of the PS8 Loudspeaker to 40Hz, providing high performance and high power output (131dB Peak) in an extremely compact, light weight package. The NEXO-designed shielded 12in Neodymium driver allows the LS400 to be used in close proximity to magnetically sensitive video equipment. Two LS400s are typically used with two PS8 loudspeakers, additional units may be used for an enhanced LF impact. PS8 and LS400 presets in the DTD Controller ensure cost-effective and simple system implementation while the NXAMP powered controller offers full network connectivity and the facility to combine PS8/LS400 configurations with any other Nexo cabinets.

The PS8 features advanced NEXO designed low magnetic emission Neodymium drivers, making the PS8 extremely light and compact while usable next to magnetically-sensitive professional video or computer equipment. The dispersion, architecture and weight balance are designed to provide uncompromised PA and stage monitor performance from a single speaker, and background and foreground music playback applications are equally well-served.High-power system (125dB Peak SPL @ 1m) with new 8in LF and 1in HF low magnetic emission Neodymium drivers for light weight (7.5kg, 16.5lbs) and negligible magnetic leakage Rotatable, asymmetrical horn and unique cabinet architecture ensure versatility; user-adaptable for both PA and stage monitoring applications. Two-way passive 8Ω design uses a single amplifier channel for simpler installation and lower cost. Sophisticated control electronics ensure reliable, linear operation. Supported with a full range of mounting and flying accessories

Arrayable 2-Way 12" Full Range Loudspeaker with Dendritic Waveguide for Installation Applications, 60° H x 40° V Dispersion. The loudspeaker is made consisting of a 12" reflex-loaded low-frequency driver and a 1.4" neodymium high-frequency compression driver. The rotatable dendritic waveguide is made capable of providing a 60° H x 40° V HF dispersion pattern in an optimally tuned enclosure. These components are matched along with an internal passive crossover, which is capable to be by-passed for fully bi-amped operation.

TURBOSOUND TCS-B218 Passive Subwoofer with wheels. Power 1200W RMS, 2400W PGM / 4 Ohms HP 2 x 18 "(46cm) direct radiation load and optimized bass reflex Frequency response: 25Hz - 150Hz ± 3dB, 20Hz - 214Hz ± 10dB Sensitivity: 104dB, 1W @ 1M Max SPL: 136dB continuous, 142dB peak Birch plywood Finish 18mm plywood. In painting textured black semi-matt Stainless steel mesh, perforated with foam backing Slots: 1 x Speakon terminal doubled NL4MP 8 M10 threaded inserts for eye screw Dimensions: 710mm x 1130mm x 730mm Weight: 104kg

The DSR series offers superior sound and has features that until now have only been found on more expensive equipment. Vari Flare; a rotatable top end horn flare. • High impact molded polypropylene enclosure• Heavy duty dynamic switch mode power supply • Built-in highly efficient class D(LF) + AB (HF) amplifiers• 10", 12", 15" low-midfrequency transducers Specifications DSR 10AFrequency range (-10dB)60Hz~19kHzFrequency response (-3dB)70Hz~19kHzHigh pass frequency40HzMaximum calculated SPL123dBHorizontal coverage80°Vertical coverage 60°Max. system power 700WAmplifier power LF300Wrms Amplifier power HF50WrmsLF transducer10"/50mmHF transducer1"/25mmCrossover frequency2.5kHzLoop/mix out XLR/M balanced AC input220-240V~50/60HzFuse ratingT4A 250V

Designed for outstanding performance, the monitors have an advanced amplifier design, high power-handling speaker components, EQ sections designed specifically for the speakers and separate speaker processing for both highs and lows. Durable construction, a two-way active, bi-amped monitor enclosure, the monitors deliver 250 watts to the custom designed 12" low frequency driver and 30 watts to the high frequency titanium compression driver. Freq.Range(-10dB): 60Hz~20kHz Freq.Response(-3dB): 70Hz~20kHz Rec.Hipass Frequency: 40Hz Max Calculated SPL: 125dB Amplifier Power LF: 300W Horizontal Coverage: 80 Vertical Coverage: 80 Amplifier Power HF: 50W Crossover Frequency: 1.6kHz Loop/Mix Out: XLR/M,Balanced AC Input: 110/220 V,AC,50/60Hz,350 Watts

A compact, high-end passive enclosure with a titanium compression horn driver. Continuous power: 300W RMS Peak power: 1200W Maximum calculated SPL: 128dB Sensitivity (1W/1m): 97dB Frequency range (-10dB): 50Hz - 20kHz Frequency range (-3dB): 60Hz - 20kHz, Crossover frequency: 2.0kHz Horizontal coverage: 90° Vertical coverage: 60° LF transducer: 12" HF transducer: 1" Nominal impedance: 8Ohms Connections: 2 x locking speaker connectors, Mounting options: 35mm top hat for pole mounting, Multiple 10mm rigging points, Other features: Titanium compression driver

High-end passive enclosures with titanium compression horn drivers. The cabinets are constructed from robust birch ply with a durable hard-wearing finish and feature CNC machined pocket handles and a 35mm top hat for pole mounting. Several flying points are fitted for ease of cabinet installation. The Zenith series cabinets feature die-cast aluminium chassis for increased rigidity helping deliver greater sonic accuracy. Enclosure features angled corners for use as wedge monitors. Specifications Continuous power (RMS): 350W, Peak power: 1400W, Maximum calculated SPL:130dB, Sensitivity (1W/1m): 98dB, Frequency range (-10dB): 45Hz - 20kHz, Frequency range (-3dB): 50Hz - 20kHz, Crossover frequency: 1.8kHz, Horizontal coverage: 90° Vertical coverage: 60°, Low-frequency transducer: 15", High-frequency transducer: 1", Nominal impedance: 8Ω, Connections: 2 x speakON connectors, Mounting options: 35mm top hat for pole mounting and multiple 10mm rigging points.

This high-end passive enclosure, with a single subwoofer, is constructed from robust birch ply with a durable hardwearing finish and features CNC machined pocket handles and a 35mm top hat for satellite mounting. Continuous power (RMS): 650W, Peak power: 2600W, Maximum calculated SPL: 133dB, Sensitivity (1W/1m): 99dB, Frequency range (10dB): 40Hz 220Hz, Frequency range (3dB): 48Hz 200Hz, LF transducer: 18'', Nominal impedance: 8Ohm Connections: 2 x speakON connectors

SP 2342 B Adjustable Speaker Pole 35 mm to M20, 1800 mm This heavy-duty 35 mm speaker pole sports a male M20 base tube thread and extends from 1.05 to 1.8 m in 7.5 cm increments. It features an unbreakable steel collar, ergonomic set screw knob and safety pin for easy and secure height adjustment. Max. load 40 kg

Small Boom Mic Stand

Speaker mount for small Speakers such as The Nexo PS8, can be truss mounted or mounted on a lifter