Blackbeam Cinematic

This durable polycarbonate 1.5W LED golf ball has a very low power consumption and looks prefect when used in festoon lighting outdoors or inside. Non-dimmable 1.5W 3,000K white 100 lumens Bayonet cap base (B22) Polycarbonate lens for increased durability Shatterproof Instant full light Average life 15,000 hours Switching cycles >10,000 Efficient - rated up to A+ Operating temperature range: -20ºC to 45ºC 240V, 50/60Hz

This powerful IP65 outdoor-rated RGBW LED wash projects an even, fully homogenized beam through fast and smooth zoom and precision optics. It utilizes IP rated power and data connectors as well as full convection cooling for a silent and reliable operation, indoors and outdoors. Light Source: 1 LEDs (quad-color RGBW) 60 W, (4 A), Beam Angle: 4° to 40° Field Angle: 8° to 55° Zoom Range: 4° to 55° Illuminance (4°): 5,370 lux @ 5 illuminance (40°): 97 lux @ 5 m Selectable PWM: 600 Hz, 1,200 Hz, 2,000 Hz, 2,400 Hz, 6,000 Hz, 18,000 Hz, 25,000 Hz

LED Framing Spot

Tri-18 RGB

Slimpar Pro VW

LEDs: 1x 60W RGBW 2 Years manufacturer warranty Beam angle: 16° (4,370 Lux @2m) 3.6kHz refresh rate DMX: 1/4//8/9 channels RDM (Remote Device Management) Static colour, auto, manual control and master/slave modes plus built-in programs 0 to 100% dimming and variable strobe (8/16-bit) Supplied bracket allows for multiple rigging or floor standing applications 4-button menu with LCD display Power: PowerCON IN/OUT DMX connector: IP65 rated 5 pin XLR IN/OUT Convection cooled 50mm snoot included Power supply: 100 to 240V, 50/60Hz Power consumption: 70W IP rating: IP65 Dimensions (HxWxD): 310x280x245mm Weight: 5.0kg

RGB Power Batten MKII

150W COB RGBA Par

150W COB RGBA Par MKII

Alu Par Compact 3000K

Colour Wash RGBW

Rapid QB1 RGBA IP is a portable battery powered uplighter outputting ultra-smooth colours from rich saturated hues to subtle pastel shades. The temporary outdoor rated compact and robust housing repels water, snow and dirt for all-weather applications and is easily concealable. The internal lithium battery has autonomy of up to 18 hours in single colour mode and up to 8 hours of colour fading and chases, while the charging time is only 5 hours. The fixture is IP54 rated (IP65 from the top), has a powerCON TRUE1 input and features an extractable foot that allows users to adjust the tilt angle. The on-board wireless transceiver and W-DMX compatibility make for a truly cable free operation. 4 x 8W quad-colour LEDs (RGBA) Beam angle: 15° (field angle: 29°) 1,551 Lux @ 2m Refresh rate: 1.2kHz DMX channels: 4/6 or 10 selectable Wireless control (W-DMX Sweden compatible transceiver) Static colour, colour change, colour fade, auto and master/slave modes 0 - 100% dimming Variable strobe M10 rigging point for clamp Adjustable foot support for angled floor standing applications (up to 25°) Carry handle for transportation Safety bond/security chain point 4 button menu with OLED display Rechargeable battery for wireless applications Maximum run time: up to 18 hours (single colour), 8 hours (colour change/fade), 4 hours (full on) Charging time: 5 hours (max.) powerCON TRUE1 input Convection cooled Supplied with IR remote

Equipped with 40 x 15W RGBW LEDs, the QX40 is suitable for illuminating event spaces, stages or facades, while the zone control allows lighting designers to create stunning effects. The unit utilises quad-colour LED technology to produce a wide colour spectrum from rich, primary colours through to subtle pastel hues. Designed for rental and events, the QX40 features quick release omega brackets, powerCON TRUE1 connectors for power input/output and also features both wired and wireless DMX by W-DMX Sweden. The slim profile of the fixture is ideally suited for loading into road trunks holding multiple units. A range of optional accessories including beam shaping lenses, snoots and barndoors further widen its applications. 40 x 15W quad-colour LEDs (RGBW) Beam angle: 8° 8° - 67,847 Lux @ 2m (full on) Refresh rate: 3kHz Pixel zone mapping Wireless DMX control by W-DMX Sweden DMX channels: 1/3/4/6/9/20 or 25 selectable RDM (Remote Device Management) Static colour, colour change and colour fade modes Master/slave mode when cabled 0 - 100% dimming 4 dimming curves: Linear, square law, inverse square law and S-curve Variable strobe Supplied with installation bracket and quick release omega clamps 4 button menu with OLED display powerCON TRUE1 input/output IP rated 5-Pin XLR input/output Fan cooled

Equipped with 40 x 15W RGBW LEDs, the QX40 is suitable for illuminating event spaces, stages or facades, while the zone control allows lighting designers to create stunning effects. The unit utilises quad-colour LED technology to produce a wide colour spectrum from rich, primary colours through to subtle pastel hues. Designed for rental and events, the QX40 features quick release omega brackets, powerCON TRUE1 connectors for power input/output and also features both wired and wireless DMX by W-DMX Sweden. The slim profile of the fixture is ideally suited for loading into road trunks holding multiple units. A range of optional accessories including beam shaping lenses, snoots and barndoors further widen its applications. 40 x 15W quad-colour LEDs (RGBW) Beam angle: 8° 8° - 67,847 Lux @ 2m (full on) Refresh rate: 3kHz Pixel zone mapping Wireless DMX control by W-DMX Sweden DMX channels: 1/3/4/6/9/20 or 25 selectable RDM (Remote Device Management) Static colour, colour change and colour fade modes Master/slave mode when cabled 0 - 100% dimming 4 dimming curves: Linear, square law, inverse square law and S-curve Variable strobe Supplied with installation bracket and quick release omega clamps 4 button menu with OLED display powerCON TRUE1 input/output IP rated 5-Pin XLR input/output Fan cooled

Stage Colour 24 RGBW

Equipped with 40 x 10W RGBW LEDs coupled with 40 degree collimators the Q40 MKII flood is suitable for illuminating large buildings, event spaces or stages. The unit utilises quad-colour LED technology to reproduce a wide colour spectrum from rich, primary colours through to subtle pastel tones across a 40° beam with a flat, even field. Designed for rental and events, the Q40 MKII features omega quick release brackets, removable floor stand/installation bracket and Seetronic TR1 IP65 connectors for power input/output and also features both wired and wireless control using CRMX TiMo wireless DMX by LumenRadio. The slim profile of the fixture is ideally suited for loading into road trunks holding multiple units. 40 x 10W quad-colour LEDs (RGBW) Beam angle: 40° 10,550 Lux @ 2m (full on) Refresh rate: 3kHz Wireless DMX control using CRMX TiMo wireless DMX by LumenRadio DMX channels: 4/6 or 8 selectable Static colour, colour change and colour fade modes Master/slave mode when cabled 0 - 100% dimming Variable strobe Supplied with installation bracket and quick release omega clamps 4 button menu with LCD display Seetronic Power Twist TR1 IP65 power input/output IP rated 5-Pin XLR input/output Fan cooled

Features 1 x 40W quad-colour LEDs (RGBW) Beam angle: 4.5° native, 10° and 25° frost lenses supplied 4.5° - 22,667 Lux @ 2m (full on) 10° - 8,788 Lux @ 2m (full on) 25° - 831 Lux @ 2m (full on) Refresh rate: 14 selectable presets between 900Hz-25kHz DMX channels: 4/6/8 or 9 selectable RDM (Remote Device Management) Static colour, colour change, colour fade and master/slave modes 0 - 100% dimming 4 dimming curves: Linear, square law, inverse square law and S-curve Variable strobe 4 button menu with OLED display Hydralock power input/output trailing connections Hydralock DMX input/output trailing connections Convection cooled 360° rotatable snoot Optional IR remote (LEDJ90C)

Stairville LED Pixel Rail 40RGB

Visage IP65 LED Par64 RGBW - 15 x 8w 4 in 1 RGBW LEDs. Robust multipar design. Beam angle 40°. Power Consumption - 95w. Supply - 100/240v/AC - 50/60Hz. 1 x 16A plug (T-Line)Set up - Digital display. DMX 512 – 7 Channels. 3 pin XLR in and through. Stand alone & master/slave functions. IP65 rated for indoor and outdoor use. Fittings - Double yoke bracket for floor or truss mounting.

These sturdy IP rated MultiPARs by Visage are celebrated for their extreme reliability indoor or outdoor in extreme weather conditions. The unit produces a very bright wash of colour including UV. Perfect for up-lighting or down-lighting specific features on stage or for architectural applications. Ideal for use in a hire department or for a fixed installation. Fully DMX controllable as well as 4 button control at the rear. Control modes include; DMX, Manual Colour, Strobe, Colour Jump, Fade or Pulse & Sound to Light modes. The range also features a double yoke bracket for truss mounting or free standing on the floor.