Blackbeam Cinematic

A combination 2-way DMX distribution splitter featuring 1 input and 2 outputs plus IEC power input and IEC power output. Both DMX input and DMX outputs are equipped with 3-Pin XLR connectors, each DMX output has an independent driver.

The ENTTEC DIN-Rail DMX-Artnet PoE node provides one universe of bi-directional DMX to Ethernet conversion, making it ideal for distributing DMX signals over a network. Fitted into IP rated Enclosure and connections, it adds connectivity to your outdoor or indoor DMX lighting fixtures over long Ethernet cables and can be powered directly from a compatible Ethernet switch over POE.

The Enttec DMX Pro Lighting Interface is the industry standard interface for connecting PCs and MACs to DMX512 lighting networks. Compatible with the broadest range of Commercial and Free software it is the fastest and most reliable interface available. Used by thousands of the lighting professionals around the world, it is used in some of the most creative light shows. Although still available for sale, the DMX USB Pro is now superseded by the DMX USB Pro Mk2 The main features of the Enttec DMX Pro Lighting Interface include: USB 2.0 Support on Windows PC and Apple OSX 1500 V full isolation (data & power lines to protect your computer from surges) Input or Output mode RDM enabled Internal frame buffering for steady DMX Generation Drivers for Windows, OSX and Linux Universe & user config EEPROM Refresh Rate configurable from 1 to 40 Fps Break configurable from 96uS to 1.3mS MaB configurable from 10.6uS to 1.3mS Upgradable firmware

Two universes (512 channel each) of input or output (one per DMX port) • Standalone mode: playback a single recorded DMX show on power-up • Midi input & output ports (DMX + MIDI cable sold separately) – MIDI needs software support • Fully compliant with USITT DMX512-A • Adjustable Frame Rates and empty frames to accommodate non-standard equipment • USB 2.0 Support on Windows PC and Mac OSX • 1500 V full isolation (data & power lines to protect your computer from surges) • RDM enabled (ANSI E1.20 compliant) • Drivers for Windows, OSX and Linux (drivers released and maintained by FTDI) • Output refresh rate configurable from 1 to 40 Fps (Frames per second) • Compatible with various open-source and professional lighting control programs.

Glasson IP Series IP350-48 Power Unit IP 66 protection Rated, 350W with 48v output. The IP series power units combine power and data on a two conductor cable allowing individual control of a full DMX universe of Glasson Electronics Lamps / LED units. The system offers dynamic lighting displays with a uniquely simple wiring structure.

Glasson V8-07 Hand Programmer

A combination 2-way DMX distribution splitter featuring 1 input and 2 outputs plus 1 powerCON input with 2 powerCON outputs. Both DMX input and outputs are equipped with 5-Pin XLR connectors, each DMX output has an independent driver.

ArtNet DMX recorder device made for outdoor environment. It can grab ArtNet DMX sequences from software/hardware source, save it internally and playback as needed. You can access device user/admin panel from a mobile device or web browser to adjust settings. Key features ● Standalone controller ● IP65 enclosure with connectors ● Up to 255 ArtNet DMX universes ● Internal SD card for storing recorded data ● Ethernet and Wireless network support ● Triggering ● Remote control ( Android/Apple/Web/API ) ● High field reliability for architecture, museum, art and other objects Pixout ArtNet DMX Recorder Specification ● Protocol: ArtNet DMX ● Internal storage: 8GB flash card ● Dimensions: L/W/H, 160x80x55 mm ● Protection level: IP65 ● Operating temperature range: -40C to +85C ● Working voltage: 12-40V DC ● Power consumption: 4W 1. RJ45 socket for 10/100Base-TX Wireless network 150Mbps

Stairville Pixel Rail Drive 640 Controller for up to 16 Pixel Rail Strips type Pixel Rail 40 RGB (maximum four per output) (item no.: 375418) Control protocols: DMX-512, ArtNet Operating modes: Stand Alone (30 programmes), Master / slave In and outputs: DMX, RJ45 (ArtNet) Operating via buttons and display on the unit Lockable connectors (Power Twist) for self-supply and for supplying further devices Robust aluminium die-cast housing

MICROSOFT SURFACE PRO 5 – 1796 I5-7300 8GB RAM 256GB SSD WINDOWS 10 PRO. Touch tablet with Pro Signature backlit keyboard and Surface Dock. QLC + vers 4.13 lighting control software installed. Surface dock connectivity includes- 199 W power supply  Supports dual 4K at 60 Hz  2 front-facing USB-C® (10 Gbps) (15 W)  2 rear-facing USB-C® (10 Gbps) video display enabled (7.5 W) 2 rear-facing USB-A 3.2 (10 Gbps) (7.5 W) 3.5 mm in/out audio jack  1 gigabit Ethernet 

Transcension DMX commander

Transcension Master 64

W-DMX Micro F-1 Lite G5 Transceiver