The four channel D80 amplifier contains configurations for all d&b loudspeakers and a linear mode. An NL8 provides all outputs on a single connector, while individual outputs are NL4 connectors.

The two channel D6 amplifier contains configurations for d&b loudspeakers and a linear mode; exceptions are 2-Way Active, V-Series and B2-SUB. It is supplied with two NL4 loudspeaker output connectors.

The single channel DSP based E-PAC power amplifier for single loudspeaker configurations and multichannel applications. The E-PAC provides set-ups for all current d&b loudspeakers (except for active systems, B1 and B2 subwoofers) and a linear mode that can be selected for MAX/MAX12 or other passive loudspeakers using a single NL4 output connector.

The P1200A mainframe has a maximum output power 2 x 600 W into 4 Ohms using two NL4 connectors. Used with d&b C or E-Series loudspeakers, the mainframe can be fitted with either one loudspeaker controller module plus the mono option, or two loudspeaker controller modules.

The C4-SUB is a bandpass subwoofer with a rich, punchy sound, specifically designed to match the C4-TOP and extend the C4 frequency response down to 50 Hz.

Available Qty 1 pair

The C7-SUB is a bass-reflex subwoofer specifically designed for use with the C7-TOP providing dynamic performance with high impulse program, a tight full sound and high efficiency. Its extra large bass-reflex tunnel guarantees high sound pressure while minimizing power compression and air turbulence noise.

The C7-TOP is a 2-way horn loaded loudspeaker that exhibits true constant directivity above a frequency of 600 Hz, ensuring equal sound within the coverage area. The bass-reflex design of the low end allows the C7-TOP to be used without a subwoofer, and with its medium to high sound pressure levels and extended directivity it is ideal for balcony or stadium sound reinforcement, delay and background music playback. Where a more powerful PA system is required a C7-TOP can be stacked with two C7-SUBs.

The E0, the smallest d&b loudspeaker, produces superlative sound and tremendous output for small, near field, delay and surround sound situations, and with the addition of a subwoofer it can be used for music playback. With a frequency response that covers the 80 Hz to 20 kHz band and a 100° conical dispersion, the E0 will display identical directivity whether deployed horizontally or vertically.

The E3 is an extremely small and versatile high performance system with astonishing sound and excellent headroom. The horn, which may be rotated to give either 90° x 60° or 60° x 90° coverage, has the necessary flexibility in directivity to enable a variety of applications such as delay, infill or distributed sound reinforcement applications. In addition, it can be used as an extremely compact stage monitor. Together with a subwoofer system the E3 is also capable of reproducing live or playback music at continuously high SPLs.

Available Qty 1 pair

2-way high performance stage monitor with constant directivity dispersion of 50° x 70°.

Intelligent rack mount AA/AAA battery charger

Varta 2100mAh Alkaline rechargeable battery.

Varta 1000mAh rechargeable battery

The A5-5 panel is an ideal shield for a 5-piece drum kit. 173.0 x 70.0 x 10.0 cm

1.6-inch thick SORBER sound absorption baffles outperform the industry standard 1-inch thick baffles by at least 50%, and are especially efficient at absorbing lower frequencies.

48-inch high A2448 CSP are commonly used on drum kits that have lower cymbals or when communication between musicians out-weighs higher coverage. 128.0 x 67.0 x 8.0 cm

This 3-section SORBER LidPac is our best seller and is similar to the SL7248 but extends a full 66 inches deep for maximum sound reduction. Fitting a 5 panel screen.

High-performance large-diaphragm condenser microphone. It is an excellent choice for vocals, electric and acoustic guitars, drum overhead and brass instrument miking. The switchable attenuation pad and low-cut filter enable high SPL up to 150dB and eliminate proximity effect.