8way 100m VDM multicore.

TASCAM DR-40 captures up to four tracks from built-in, high-quality condenser microphones, XLR mic or line inputs. The internal Mics are adjustable from XY to AB position, helping you to tailor your recording to the sound of the room, while a pair of great-sounding TASCAM microphone preamps welcome condenser microphones with phantom power, recording at up to 96kHz/24-bit resolution

Permanently Polarized Condenser Microphone with a Super-cardioid Characteristic for Vocals. On a capsule head for the UR2

d&b Z5396, Y Base Plate / Stack Adaptor

Please call for info.

Please call for info.

Please call for info.

Please call for info.

Please call for info.

DPA 4066 Miniature Omnidirectional Microphone (Beige) This microphone offers clean and transparent sound quality with lots of headroom.

Please call for info.

The extremely low-profile E6 Earset delivers beautifully uncoloured audio while rejecting surrounding noise and feedback. An ultra-miniature electret condenser element is held close to the mouth by a thin boom and comfortable earpad.

The B3 is ideally suited to individual miking and is perfect for discrete on stage use in productions providing exceptional audio quality.

MIC-3000x4 Omni Headset (Beige) - TA4F

The SL-G SUB is a cardioid subwoofer to compliment the GSL and KSL Systems. The SL-G SUB is intended for ground stacked applications only. The subwoofer is an actively driven 2-way bass-reflex designs housing three long excursion 21" neodymium drivers. Two drivers face to the front while one radiates to the rear. The front and rear facing drivers operate in independent bass reflex chambers and are driven from separate amplifier channels.

The J-SUB is an actively driven 2-way bass-reflex design housing three long excursion neodymium 18" drivers, two drivers face to the front and one driver to the rear. The cardioid dispersion pattern resulting from this approach avoids unwanted energy behind the system, which greatly reduces the reverberant field at low frequencies and provides the greatest accuracy of low frequency reproduction.

The J8 is a 3-way design housing 2 x 12" LF drivers, one hornloaded 10" MF driver and two 1.4" exit HF compression drivers with 3" voicecoils mounted to a dedicated waveshaping device. The mechanical and acoustical design enables flown vertical columns of up to 24 loudspeakers to be suspended using vertical splay angles between them of 0° to 7° with a 1° resolution. The cylindrical wave segments produced couple coherently in the vertical plane.

The J12 is a 3-way design housing 2 x 12" LF drivers, one hornloaded 10" MF driver and two 1.4" exit HF compression drivers with 3" voicecoils mounted to a dedicated waveshaping device. The mechanical and acoustical design enables flown vertical columns of up to 24 loudspeakers to be suspended using vertical splay angles between them of 0° to 7° with a 1° resolution. The cylindrical wave segments produced couple coherently in the vertical plane.

The KSL8 line array module produces an 80° constant directivity dispersion pattern in the horizontal plane over the entire operating bandwidth. The KSL8 houses two 10" neodymium forward facing LF drivers and two side firing 8" neodymium LF drivers. A coaxial mid-high section contains an MF horn with an 8" driver and two 1.4" exit, 3" voice coil HF compression drivers mounted to a dedicated wave shaping device. SL-Series flying hardware comes with a patended workflow with integrated tension and compression rigging modes, allowing splay angles between cabinets from 0° to 10° in 1° increments.

The KSL12 line array module produces an 120° constant directivity dispersion pattern in the horizontal plane over the entire operating bandwidth. The KSL12 houses two 10" neodymium forward facing LF drivers and two side firing 8" neodymium LF drivers. A coaxial mid-high section contains an MF horn with an 8" driver and two 1.4" exit, 3" voice coil HF compression drivers mounted to a dedicated wave shaping device. SL-Series flying hardware comes with a patended workflow with integrated tension and compression rigging modes, allowing splay angles between cabinets from 0° to 10° in 1° increments.